MIA Laboratories’ 413 Tape Saturator
413 Tape Saturator offers 3 different types of Analog Tape, as well as 3 different types of distortion.
The 413 reproduces the non-linear characteristics that would result when over-driving analog tape, as magnetic saturation occurs with increasing amplitude of the 'recorded' signal.
- Advanced Tape Saturation algorithm
- Tube, Transistor and Soft Clipping Distortion
- Real tape-hiss
- 'IEC on NAB' playback equalization mode
For the saturation process, the signal gets dynamically changed, especially high frequency information, in response to its amplitude. The resulting effect simulates the saturation of analog tape, in a controllable environment which can be adjusted according to your preference.
The user can choose among 3 different types of Analog Tape, each corresponding to the noise and saturation characteristics of 3 different well known tape brands.
3 distortion types are also available, enabling the user to produce the harmonic content/distortion one would get by over-driving certain Tube or Transistor circuits.
- macOS 10.7-10.14
- 64 bit
- Windows 7-10
- 64 bit
MIA Laboratories products require you to register with the manufacturer at www.mialaboratories.com as well as with www.ilok.com and my.plugivery.com/redeem to activate your license.
This product requires an activation!
You can either "soft" activate on your computer without addditional hardware or transfer the license to an iLok USB dongle which has to be purchased separately. The iLok dongle can be used to run the protected software on different computers. Your licenses can be easily manged using the iLok Licence Manager. To protect your investment against theft or loss we recommend the iLok Zero Downtime protection with TLC.
An internet connection on any computer and a free user-accout at www.ilok.com is required to authorize the product.
Please check with the software manufacturer which iLok version is required at least if you want to use a hardware iLok!