The Complete Live RTA Solution
The Flux Analyzer Live provides the elements needed to assist the live sound engineer in speaker array calibration tasks, a delay finder, level, meter, transfer function magnitude, phase and coherence spectra, and impulse response, as well as snapshot facilities.
The actual analysis is then performed using a computer with a graphic card supporting OpenGL/DirectX. The system could also be coupled with a wireless transmitter to route a source test signal to the laptop to perform transfer curve measurements at different locations more conveniently.
Product Features
- Multi-Channels reference support (up to 8 with multichannel option)
- Individual channel selection
- Summation mode
- Multi-Microphone support (up to 16 with multichannel option)
- Individual channel selection
- Summation mode
- Meters fully customizable to make the matching as close as possible to the norm
- Color
- Scaling
- Integration time
- Reference level
- Peak Hold
- SPL unit with calibration tools
PLEASE NOTE!
Flux Analyzer Live is not a full product, in order to run this, the Flux Analyzer Essential is required!
Mac:
- macOS 10.14.6 or higher
- 64 bit
- Graphic card fully supporting OpenGL 2.0 is required
- Apple Silicon or Intel processor
Windows:
- Windows 10 / 11
- 64 bit
- Graphic card fully supporting OpenGL 2.0 is required
- Intel processor
Flux products require you to register with the manufacturer at www.flux.audio as well as with www.ilok.com and my.plugivery.com/redeem to activate your license.
This product requires an activation!
You can either "soft" activate on your computer without addditional hardware or transfer the license to an iLok USB dongle which has to be purchased separately. The iLok dongle can be used to run the protected software on different computers. Your licenses can be easily manged using the iLok Licence Manager. To protect your investment against theft or loss we recommend the iLok Zero Downtime protection with TLC.
An internet connection on any computer and a free user-accout at www.ilok.com is required to authorize the product.
Please check with the software manufacturer which iLok version is required at least if you want to use a hardware iLok!
