Mono/Stereo Channel Strip Plug-in with 3 combinable Tools
Funkenschlag is a mono / stereo channel strip plug-in with three combinable tools that color the sound of your tracks.
The first part is a preamp based on a German tube preamp from the 1950s. It is used for harmonic tube distortion and offers two filters for selected high and low frequencies. The preamp section has an auto-trimmed output, so you do not add unwanted gain to your signal, just harmonic distortion to keep the compression from increasing.
The second part is a compressor and limiter based on a 1960s analog vintage device. With classic controls such as „Eingangspegel“, „Begrenzung“, „Arbeitspunkt“ und „Rückstellzeit“, you have a tonal range from subtle compression to heavy limiting of the signal.
The third section offers a graphic equalizer with selected frequencies for flexible sound design. The signal flow can be changed by switching the equalizer before or after the compressor / limiter. Each section of the channel strip can be turned on and off separately for even greater usability and control of CPU utilization when needed.
Mac:
- macOS 10.13 or higher
- 64 bit
- Dual Core CPU
- RAM: 8GB
- 1024x768 or higher display resolution
Windows:
- Windows 10
- 64 bit
- Multicore CPU
- RAM: 8GB
- 1024x768 or higher display resolution
Required Registration:
Prime Studio products require you to register with the manufacturer at www.primestudio.at to activate your license.
This product requires an activation!
An internet connection is required to authorize / activate the product.
