Multi-channel Phase Interactions Mixer Plug-in
Pi works to improve the summing of a DAW or a mixer. Pi dynamically minimizes frequency cancellations between instruments within the mix, improves mono compatibility and brings back the lost depth and focus lost when overlapping frequencies collide.
Good phase relationships between mixer tracks, are a key to great sounding mix. Normally, where mixer channels are summed into a single stereo mix bus, instruments overlap and interact with each-other across the frequency range and phase position. Often, a bass track could be temporarily out-of-phase with the kick or rhythm guitar tracks, and when summed into a mix, end up cancelling each-other over the overlapping frequency range, causing a temporary "hole" in the low end. Similarly, a snare track could end up sounding thin in a mix when the toms resonance are out of phase with the snare.
Designed to enhance any mix, Pi dynamically rotates the phase of the individual mixer channels to achieve maximum phase correlation within the mix. Pi minimizes negative interaction and significantly improves the overall sound of the mix. Just drop Pi into the last insert slot of your DAW mixer channels and listen. Use any of the 64 groups to bind related instrument channels to enhance your mix even further.
- Groundbreaking, true multi-channel engine, dynamically optimizes phase relationships between mix channels for optimal sounding mix
- Three-mode track grouping for enhanced related instruments and multi-mic setup phase correlation optimization
- Full Range and Low Frequency global optimization modes
- Four mode multi-channel phase correlation display, enables a unique view of the phase relationships within the mix
- Internal, inter-channel sample accurate routing, no complicated side-chaining required
Pi is available for Mac & PC in AAX, RTAS, VST and AU formats, in 32 and 64 bits where applies.
The system requirements can be found in the product description or on the manufacturer's website.
This product requires an activation!
You can either "soft" activate on your computer without addditional hardware or transfer the license to an iLok USB dongle which has to be purchased separately. The iLok dongle can be used to run the protected software on different computers. Your licenses can be easily manged using the iLok Licence Manager. To protect your investment against theft or loss we recommend the iLok Zero Downtime protection with TLC.
An internet connection on any computer and a free user-accout at www.ilok.com is required to authorize the product.
Please check with the software manufacturer which iLok version is required at least if you want to use a hardware iLok!