PSP 608 MD is perhaps the most fully featured delay plug-in available on the market. PSP has striven to offer you a creative tool that is not only functional, but inspiring.
Each tap has selectable feedback, stereo image and position, delay time, multimode filter, modulation, drive/tape saturation, and reverb. Moreover, the feedback and drive can be placed at the beginning or end of the signal chain for even more sound design options!
The modulation section consists of both an LFO and Envelope follower, and the tape saturation algorithm is taken from PSPs renowned mastering processors. And of course all this can be done at any bit depth and sample rate up to 24-bit, 192kHz, and be fully automated via MIDI and any host sequencer.
Up to 8 seconds of delay time per channel
Continuous control over the delay time in milliseconds and/or chosen quantize note
Three operation modes: Multidelay, in which each tap has its own feedback buffer; Multitap, in which the Master Feedback operates on one (user selectable) tap; and MultiFB, where switches the tap off not switch the feedback signal off
Each tap included independent adjustment of the following: gain, stereo field width and balance, delay time, filtering, modulation, saturation simulation and reverberation
Each tap can choose between multiple quadruple biquadratic filter types, including: Low Pass, Band Pass, High Pass, PEAK filter and four Shelf filters
Modulation section (LFO and envelope follower) offer adjustable modulation depth of 3 octaves, and can be selected for filter cutoff
Tape saturation simulation with adjustable gain based on the algorithm used in PSPs mastering processors
Filtering module in feedback includes LP, BP, HP filter (either State Variable Filter or Biquad) with adjustable cutoff and resonance
Vintage reverberation module for faithful simulation of spring and plate reverbs
Support for sample rates of up to 192kHz
Host and MIDI automation of all processing
Win7 (32/64-Bit) or later
Mac OSX 10.8 (32/64-Bit) or later
This product requires an activation!
You can either "soft" activate on your computer without addditional hardware or transfer the license to an iLok USB dongle which has to be purchased separately. The iLok dongle can be used to run the protected software on different computers. Your licenses can be easily manged using the iLok Licence Manager. To protect your investment against theft or loss we recommend the iLok Zero Downtime protection with TLC.
An internet connection on any computer and a free user-accout at www.ilok.com is required to authorize the product.