Compressor ONE - MIAs Premier Compressor
Compressor ONE is MIA's approach to a very flexible dynamics processor. This compressor can work in “Stereo Link” mode, the same amount of compression is applied to both L/R channels, based on the sum of the two.
With Stereo Link disabled, compression takes place independently for each channel, whilst retaining common controls for both.
External Sidechain = Use any other channel of your mix as an input to the side-chain of MIA Compressor One.
Sidechain filtering = Use the High Pass and Low Pass filters to restrict the side-chain information to the desired frequency range.
Band Compression = Define a certain frequency range to be compressed, while the rest of the signal remains unaffected.
Colour Type = Five carefully designed eq curves to add some “MIA” flavour to your sound.
Input, Output, Gain Reduction Meters = Visualize the compression process with the assistance of the input, output and gain reduction displays in either Peak or RMS mode.
34 MIA Presets = 34 carefully designed MIA Presets, to achieve quick and balanced results, or to act as a perfect kick start towards your desired outcome.
Dry-Processed Control = Control the balance between the Dry and the compressed signal
- macOS 10.7-10.14
- 64 bit
- Windows 7-10
- 64 bit
MIA Laboratories products require you to register with the manufacturer at www.mialaboratories.com as well as with www.ilok.com and my.plugivery.com/redeem to activate your license.
This product requires an activation!
You can either "soft" activate on your computer without addditional hardware or transfer the license to an iLok USB dongle which has to be purchased separately. The iLok dongle can be used to run the protected software on different computers. Your licenses can be easily manged using the iLok Licence Manager. To protect your investment against theft or loss we recommend the iLok Zero Downtime protection with TLC.
An internet connection on any computer and a free user-accout at www.ilok.com is required to authorize the product.
Please check with the software manufacturer which iLok version is required at least if you want to use a hardware iLok!